EGR Valve Emulator for VW AUDI SEAT SKODA 1.6 TDI CAYA CAYB CAYC CAYD CAYE

EGR valve emulator for VW AUDI SEAT SKODA vehicles with 1.6 TDI CR (engines: CAYA CAYB CAYC CAYD CAYE)

When EGR valve is faulty or removed engine ECU detects it and engine runs in a limp-home mode and check engine light is on. This emulator simulates the operation of the EGR valve, preventing the ECU to report DTC and allow engine to run smooth without errors.

This item should be used for motorsport applications or testing purposes. Please check the laws and legislation in your country before purchasing this item.

APPLICATIONS

AUDI VW SKODA SEAT vehicles with 1.6Tdi CR engines:

• CAYA – 1.6 TDI 55 kW
  • VW Polo  2009->
  • SKODA Fabia 2010->
• CAYB – 1.6 TDI 66 kW
  • Audi A1 2011->
  • Audi A3 2009->
  • VW Golf 2009->
  • VW Jetta 2009->
  • VW Polo 2009->
  • VW Touran 2010->
  • SKODA Fabia 2010->
  • SKODA Praktik 2010->
  • SKODA Roomster 2010->
  • SEAT Altea 2010->
  • SEAT Ibiza 2009->
  • SEAT Leon 2010->
• CAYC – 1.6 TDI 77 kW
  • Audi A1 2010->
  • Audi A3 2009->
  • VW Beetle 2011->
  • VW Golf 2009->
  • VW Jetta 2009->
  • VW Passat 2009->
  • VW Polo 2009->
  • VW Touran 2010->
  • SKODA Fabia 2010->
  • SKODA Octavia 2009->
  • SKODA Roomster 2010->
  • SKODA Superb 2010->
  • SKODA Yeti 2010->
  • SEAT Altea 2009->
  • SEAT Ibiza 2009->
  • SEAT Leon 2010->
• CAYD – 1.6 TDI 75 kW
  • VW Caddy 2010->
• CAYE – 1.6 TDI 55 kW
  • VW Caddy 2010->

EGR valve must be in closed position. If it will be open, emulator will not work correctly without a blanking plate.

INSTALLATION

1. Disconnect original EGR connector
2. connect emulator to EGR connector on engine wiring
3. cut signal wire from MAF sensor (pin 3)
4. connect black wire to MAF side and grey wire to the engine ECU side